Đánh số và Đặt tên Tiêu chuẩn Châu Âu

Việc gán số bắt đầu với EN 1 (Bếp dầu với đốt hơi). Các khoảng số được xác định trước sau đây là một ngoại lệ[đối với cái gì?].[7]

Khoảng sốNhận định
EN 1 tới EN 99Mẫu nguyên bản của Ủy ban tiêu chuẩn Châu Âu (CEN)
EN 1000 tới EN 1999Mẫu nguyên bản của Ủy ban tiêu chuẩn Châu Âu (CEN)
EN 2000 tới EN 6999Các tiêu chuẩn được chuẩn bị bởi Hiệp hội Công nghiệp Quốc phòng và Hàng không Châu Âu (ASD STAN)
EN 10000 tới EN 10999Khoảng số dự trữ
EN 20000 tới EN 29999Obsolete numbering for standards adopted by the International Organization for Standardization (ISO) adopted standards. ISO NNNN" became "EN 2NNNN", e.g. ISO 2338 = EN 22338 (currently: EN ISO 2338)
EN 40000 tới EN 49999Liên quan tới các tiêu chuẩn công nghệ thông tin IT và được phát triển bởi CEN hoặc CENELEC.
EN 50000 tới EN 59999Các tiêu chuẩn CENELEC
EN 60000 tới EN 69999Các tiêu chuẩn CENELEC dựa trên các tiêu chuẩn của Ủy ban kỹ thuật điện quốc tế (IEC), có hoặc không có sửa đổi
EN 100000 tới EN 299999Các tài liệu của Uỷ ban các cấu phần điện tử CENELEC (CECC) nhằm đánh giá chất lượng cho các cấu phần điện tử
EN 300000 tới EN 399999Các tiêu chuẩn của Viện Tiêu chuẩn viễn thông Châu Âu (ETSI)

Since standards are updated as needed (they are reviewed for currency approximately every five years), it is useful to specify a version. The year of origin is added after the standard, separated by a colon, example: EN 50126:1999.

In addition to the EN standards mentioned, there are also the EN ISO standards with the numbers ISO 1 to 59999 and the EN IEC standards from IEC 60000 to 79999, as well as EN standards outside the defined number ranges.

When an EN is adopted by a national standards body into the national body of standards, it is given the status of a national standard (e.g. German Institute for Standardisation (DIN), Austrian Standards International (ÖNORM), Austrian Standards International (SN)). The name is then prefixed by the country-specific abbreviation (e.g. ÖNORM EN ...), and the number of the European standard is usually adopted, e.g. DIN EN ISO 2338:1998 or ÖNORM EN ISO 9001:2000.